Lork 1 Posted January 18, 2014 Share Posted January 18, 2014 Hello! English translation is done auto-translator apologize for any inaccuracies. Thanks for your product - ORBX Vector! Only encountered one problem. After installation of the vector, I broke the script from Norilsk X Aerosoft. It made ​​the runway slide now she straightened and climbed over Peron. Enclose screenshots. On the support forum Aerosofta redirected me to you. I do not know what to do, like vector and Norilsk. You'll have to arrange among themselves as anything ispravte problem. Thank you for your understanding! Quote Link to post Share on other sites
Kaeptn 121 Posted January 19, 2014 Share Posted January 19, 2014 Hello,disable by rename this file:FSX Root directory\ORBX\FTX_VECTOR\Scenery\CVX7107.bgl > CVX7107.Norilsk Quote Link to post Share on other sites
Lork 1 Posted January 20, 2014 Author Share Posted January 20, 2014 Thank you very much - it worked! So easy! Quote Link to post Share on other sites
Lork 1 Posted May 1, 2014 Author Share Posted May 1, 2014 Hi. Again having the same problems. After treatment proposed here in the forum, everything was fine. Then there was the set OrbxFTXGlobalVECTOR110 and is also doing well. Introduced in the configuration scenario exception and everything is OK. Then installed OrbxFTXGlobalVector115 and all became ill again. The same problems that have been described in the beginning of the post. Changing the settings configurator does not help, treatment used for the first time is not possible, since the file structure has changed product. Regards, Alexandr. Quote Link to post Share on other sites
Bernd Podhradsky 82 Posted May 1, 2014 Share Posted May 1, 2014 Have you tried the AEC auto configuration tool? Bernd Quote Link to post Share on other sites
Lork 1 Posted May 1, 2014 Author Share Posted May 1, 2014 I tried to use and the AEC auto configuration tool and manual rectification. Quote Link to post Share on other sites
Lork 1 Posted May 1, 2014 Author Share Posted May 1, 2014 Roll back to the version OrbxFTXGlobalVECTOR110. The problem disappeared. Quote Link to post Share on other sites
Lork 1 Posted May 1, 2014 Author Share Posted May 1, 2014 Tell me please. How to add exceptions to the area of ​​the airport UHWW? Quote Link to post Share on other sites
Bernd Podhradsky 82 Posted May 2, 2014 Share Posted May 2, 2014 Hi! I think there's an exclusion polygon missing in your add-on scenery (but that's just a wild guess) - please give ABP_UOOO as well als ABP_UOOO_Default (both files are in the FTX_VECTOR_APT folder) a new extension ".disabled" (so you will have to files: ABP_UOOO.disabled and ABP_UOOO_Default.disabled) and see if that works. Bernd Quote Link to post Share on other sites
Lork 1 Posted May 2, 2014 Author Share Posted May 2, 2014 Sorry, I can't check it, reset Vector to the version 1.10 and everything works as it . To go back to version 1.15 don't want it, wait for the next patch. Quote Link to post Share on other sites
Lork 1 Posted December 28, 2014 Author Share Posted December 28, 2014 Hi! I think there's an exclusion polygon missing in your add-on scenery (but that's just a wild guess) - please give ABP_UOOO as well als ABP_UOOO_Default (both files are in the FTX_VECTOR_APT folder) a new extension ".disabled" (so you will have to files: ABP_UOOO.disabled and ABP_UOOO_Default.disabled) and see if that works. Bernd Hi! It has been updated to version 1.20, but the problem remained unsolved. I did as you advised, change the file extension ABP_UOOO, but it did not help. By the way, UOOO, in the configuration I have is in the exception list, but the extension is not changed automatically. Other scenes from the list of exceptions expanding replaced. Once again in version 1.10 vectors, okay solved by adding scenes to the list of exceptions. Please, deal with this problem finally !!!! Quote Link to post Share on other sites
Lork 1 Posted December 28, 2014 Author Share Posted December 28, 2014 Disabled (renamed extension) ABP_UOOO_Default.bgl ...... you know, like everything was normal. Quote Link to post Share on other sites
Richard Lincoln 762 Posted December 30, 2014 Share Posted December 30, 2014 Hi Lork, Could you please elaborate on the above post, has this been resolved? I look forward to hearing from you. Thanks Richard Quote Link to post Share on other sites
Bernd Podhradsky 82 Posted December 31, 2014 Share Posted December 31, 2014 Hi! To be honest it's hard for me to follow this thread! Is the problem solved? I'm not sure if VECTOR alone can solve the problem (but probably only because I don't really know what's going on in the first place). Sorry, maybe you can expand a little on this!? Bernd Quote Link to post Share on other sites
Lork 1 Posted January 1, 2015 Author Share Posted January 1, 2015 Hi Lork, Could you please elaborate on the above post, has this been resolved? I look forward to hearing from you. Thanks Richard Hi! First deactivate UOOO menu FTX Vector Configurator. Then The deactivation is accomplished by renaming the file extension (. BGL): ORBX\FTX_VECTOR\FTX_VECTOR_APT\scenery\ABP_UOOO_Default ORBX\FTX_VECTOR\FTX_VECTOR_EXX\scenery\7101_EXX_Excludes In the library of scenarios in the FSX, raised the scenario of Norilsk higher. 1 Quote Link to post Share on other sites
carlosqr 4,605 Posted June 14, 2020 Share Posted June 14, 2020 (edited) Hi As I see this topic is yet active I decided to ask on it I have this problem too. The issue is that all around the perimeter of the apron ( I think that is how is called the area where the planes park) has an elevation. Only that area, which seems strange to me to be just that so I doubt it is an ACE issue as all the terrain around is okay. Here you can see all the gray think line is what elevates Here you can appreciate better the elevation of the whole gray area This is in P3D v4.5 The manual has this text which make reference to the bgl mentioned above But I am unsure of what the procedure is to fix it. It seems I have to turn off the AEC for UOOO? ( Because I did that and the area sunk, so put it back) Then it says: On 1/1/2015 at 3:43 AM, Lork said: Orbx\FTX_VECTOR\FTX_VECTOR_APT\scenery\ABP_UOOO_Default Orbx\FTX_VECTOR\FTX_VECTOR_EXX\scenery\7101_EXX_Excludes Am I supposed to to put the first bgl as default? By default means putting is a bgl or do I have to rename it as default? This is what my search drew So am I ok to deduct I should not touch anything here? Or do I have to disable the first one ant active the second? Then for the other folder I did find the mentioned bgl: So I put this off then? Can you please clarify a bit just to be sure. please?, I don't want to mess it up Thanks Carlos PS I forgot to share this. These are all the bgls within the Norilsk scenery folder. I thought that maybe you could identify a conflict one maybe currently unnecessary being P3D and not FSX... Cheers Carlos Edited June 14, 2020 by carlosqr Quote Link to post Share on other sites
carlosqr 4,605 Posted June 16, 2020 Share Posted June 16, 2020 Hi Any comments on this? Thanks Carlos Quote Link to post Share on other sites
Nick Cooper 6,787 Posted June 17, 2020 Share Posted June 17, 2020 Hello Carlos, as this is such an old topic and it looks like the Vector developer has answered it, we can only read what is there and try the suggestions. All I can add, is that if you think that there are two possible meanings, try them both. Quote Link to post Share on other sites
carlosqr 4,605 Posted June 17, 2020 Share Posted June 17, 2020 Hi Nick Thank you for replying All is really confusing for me, thus I asked for a clear confirmation of what I should do but it is okay, I'll see if I can fix it Thank you Cheers Carlos Quote Link to post Share on other sites
anatolski 8 Posted January 9 Share Posted January 9 Hi Carlos, could you fix it in Prepar 4.5? I dont know to buy or not. The scenery itself seems to be quiet good. regards, Thomas PS: In the meantime I could solve the dd seattle autogen problem... Quote Link to post Share on other sites
carlosqr 4,605 Posted January 9 Share Posted January 9 Hello Anatolski It has no fix Aerosoft simply told me the product is not compatible with P3D v4. It works only from V1 to v3 I agree, all is perfect in this scenery in P3D v4 except that issue/elevation on the apron, so they should have fixed it as all the rest is great but I think it could be a limitation on v4???.. They never told me if they would update it, they didn't seemed interested at all in an update. I am hardly using P3D so I left it that way Best regards, Carlos Quote Link to post Share on other sites
anatolski 8 Posted January 12 Share Posted January 12 Thank you Carlos! kind regards, Thomas 1 Quote Link to post Share on other sites
carlosqr 4,605 Posted January 12 Share Posted January 12 You’re very welcome Thomas Quote Link to post Share on other sites
Soulflight 0 Posted January 18 Share Posted January 18 (edited) To anyone still interested in this: What Orbx vector configuration tool is doing when you deactivate elevation correction for an airport like UOOO, is replacing the corrected file with the one labeled "default" This one: Orbx\FTX_VECTOR\FTX_VECTOR_APT\scenery\ABP_UOOO_Default.bgl Using the correction tool only for deactivation, it will be set to active. However, this elevation isnt correct in that case either, causing the mentioned elevation problems. After I deactivated this file manually by RENAMING this file to "Orbx\FTX_VECTOR\FTX_VECTOR_APT\scenery\ABP_UOOO_Default.xxx" for example while leaving elevation correction for UOOO DEACTIVATED in the setup tool, everything was solved. Should you be using FS global: dont forget to also deactivate DX071007.bgl in the "asi" folder of it, using the same way. Edited January 18 by Soulflight Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.