Wuffi84 3 Posted January 20 Share Posted January 20 (edited) Can i switch off the static AI , because normal AI Stops at begin of rwy ?! If so, which file do I have to rename to .off ? Edited January 20 by Wuffi84 Quote Link to post Share on other sites
Teo Gerovski 54 Posted January 20 Share Posted January 20 Will include an option in the next update. There is no option for now. Cheers Teo Quote Link to post Share on other sites
Wuffi84 3 Posted January 21 Author Share Posted January 21 Okay , thx for Info. But is there no possibility to delete one .bgl @ C:\Users\USERNAME\Orbx-Bibliothek\p3dv5\LWSK Skopje International Airport\Orbx\FTX_EU\FTX_AA_LWSK\Scenery or rename that to .off maybe ? Quote Link to post Share on other sites
Wuffi84 3 Posted January 21 Author Share Posted January 21 Look Photo for AI Problem. AI´s roll on rwy and hold there but then they doesn´t start. Quote Link to post Share on other sites
marks022 3 Posted January 22 Share Posted January 22 Same here - no takeoff of any AI; they still "park" at the TO position. Quote Link to post Share on other sites
Krielkip 1 Posted January 23 Share Posted January 23 Yesterday when I was landing on runway 34 RAAS told me that I was heading for the taxiway!? What is going wrong and how to solve this? Quote Link to post Share on other sites
Teo Gerovski 54 Posted January 23 Share Posted January 23 Hey guys, Thanks for the report. I have no idea why does the AI stops on the backtrack runway 34, I think that's not my fault, but will have a look. Quote Link to post Share on other sites
Patrick Chaieb 5 Posted January 24 Share Posted January 24 14 hours ago, Teo Gerovski said: Hey guys, Thanks for the report. I have no idea why does the AI stops on the backtrack runway 34, I think that's not my fault, but will have a look. I'm not sure but this is mostly when the holding point is too far or to close to the runway. Kind Regards Patrick 1 Quote Link to post Share on other sites
Patrick Chaieb 5 Posted January 28 Share Posted January 28 Dear Teo Thank you for your good work. May I ask, when approximately we can expect an update at least for the correct name on the Terminal? Kind Regards Patrick Quote Link to post Share on other sites
Teo Gerovski 54 Posted January 30 Share Posted January 30 Hey Patric, I'm late with the update and I'm really sorry about that, I had some exams at college, so I had to work on them..I hope we will release the update soon Cheers Quote Link to post Share on other sites
Teo Gerovski 54 Posted February 12 Share Posted February 12 Hi folks, I'm sorry I'm late with the update.I finally found some time to spend updating the notes you gave me.The name is changed and now, you can disable the AI by yourself. Unfortunately, I was unable to fix the aircraft stopping at TO position, I can't find the reason. I hope the update will be available these days. Cheers Teo 1 Quote Link to post Share on other sites
Patrick Chaieb 5 Posted February 14 Share Posted February 14 Hi Teo Thank you for the advice. In Orbx there is no update right now[?] Kind Regards Patrick Quote Link to post Share on other sites
Teo Gerovski 54 Posted February 14 Share Posted February 14 The files are sent off to the head administrators.Im waiting as well. Quote Link to post Share on other sites
Patrick Chaieb 5 Posted February 14 Share Posted February 14 Regarding the AI Problem, as far as I can see (there are no holding points near the runway?] But I don't understand a lot of AFCAD creation. Kind Regards Patrick Quote Link to post Share on other sites
Teo Gerovski 54 Posted February 18 Share Posted February 18 The update is available on Orbx Central. Thank you for your patience. Cheers Teo Quote Link to post Share on other sites
Wuffi84 3 Posted February 18 Author Share Posted February 18 (edited) Sorry @ Teo Gerovski ! I did Ubdate LWSK to 1.1.0, but i got the same Problem with the AI Traffic like Before !! AI´s roll on rwy and hold there but they doesn´t start. Same point ! Config is also not found in OrbxMenu ?! Maybe wrong File in Ubdates Edited February 18 by Wuffi84 Quote Link to post Share on other sites
Teo Gerovski 54 Posted February 18 Share Posted February 18 You can rename the file ORBX_LWSK_dash8.BGL to ORBX_LWSK_dash8.BGL.off or something else. About the AI, I cannot find the problem, so as I said, I apologize about that. Cheers Teo Quote Link to post Share on other sites
marks022 3 Posted February 18 Share Posted February 18 I've updated the AFCAD --> I redone the taxilines, added holdshorts and replaced the T/O-positions. And now - the AI starts correctly. I also replaced the terminal taxi to the gates. When its okay for Teo, I would upload my afcad. 1 Quote Link to post Share on other sites
Teo Gerovski 54 Posted February 19 Share Posted February 19 I tried the same but got no luck and decided not to replace the old file just not to mess anything up. Can you send it off to me please, so I can check it? Cheers Teo 1 Quote Link to post Share on other sites
Patrick Chaieb 5 Posted Friday at 07:06 PM Share Posted Friday at 07:06 PM Would be happy if we could get this AFCAD:) Best Regards Patrick Quote Link to post Share on other sites
marks022 3 Posted Friday at 07:56 PM Share Posted Friday at 07:56 PM I can't sent any private message -> i dont know why? :-( So you can find my modified afcad attached. Sorry Teo - I hope its okay for you. I also added the runway centerlights and touchdownlights as in real life. Maybe you must rename it to the original filename. LWSK_APX.bgl 1 Quote Link to post Share on other sites
Teo Gerovski 54 Posted Saturday at 12:40 PM Share Posted Saturday at 12:40 PM We found the problem, and problem with sode gate 206 as well.It is going to be fixed soon and send the files over to you. Apologize once again. Cheers Teo 1 Quote Link to post Share on other sites
Wolkenschreck 14 Posted Saturday at 04:56 PM Share Posted Saturday at 04:56 PM (edited) HI Teo @Teo Gerovski! First and foremost a huge thank you for bringing this freeware jewel to our sim! It's a fantastic scenery. I know that Jean-Philippe @Jeepee , a known and experienced user of AIG, has done an AFCAD for your LWSK that is perfectly adapted for AI and online flying. Maybe you can get in touch with him and use it for the scenery? "Nav aids are also modified to included the steep 3.3° ILS slope, and the deletion of the DME (ILS procedure is based on the DME reading of 'SKJ' VOR)."https://www.alpha-india.net/forums/index.php?topic=35450.msg351208#msg351208 The AFCAD by marks022 is not bad (thanks for it mate!) but does still miss hold short points. Every taxiway connected with the runway MUST have an hold short point, not only the runway ends. BTW a last question: Would it be possible to made the static aircraft (Air Serbia A320 and Croatia Dash 8 ) optional? I could deleted the A320 myself with a modification of ORBX_LWSK_lib_plc.BGL but the Dash 8 is part of ORBX_LWSK_Clutter_OBJ.BGL can not be removed. Having the statics removed would make things easier for AI and VATSIM events. Once again thank you for your great freeware and take care! Christoph Edited Saturday at 04:58 PM by Wolkenschreck Quote Link to post Share on other sites
Teo Gerovski 54 Posted Saturday at 04:59 PM Share Posted Saturday at 04:59 PM The updated files does not contain the a320 anymore.There is a file named orbx_lwsk_dash8.bgl so just change to .off and it will not show up.The afcad is currently in work and everything is going to be fixed very soon. Cheers Teo 1 Quote Link to post Share on other sites
Wolkenschreck 14 Posted Saturday at 05:03 PM Share Posted Saturday at 05:03 PM Wonderful! Thanks for your fast reply Teo. :-) And if you need any further help with the AFCAD just let me know. I am doing the AFCADs for Digital Design and have also done the AFCAD for the latest MK Studios EFHK Helsinki. More than happy to help you if needed. Enjoy your weekend and thanks again! 1 Quote Link to post Share on other sites
Teo Gerovski 54 Posted Saturday at 05:43 PM Share Posted Saturday at 05:43 PM Will have you in mind man. Wish you a nice rest of the weekend. Cheers Teo Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.