Jump to content

Recommended Posts

Posted (edited)

Looks like the ortho files of TE SoCal generate 'stairs' on certain runways (KSAN and KYMF). 

I tried desactivate every file (even other addon) these "bumps" appear with the Ortho folder is activated.

Am I the only one having this issue?

Edited by ydelta

Share this post


Link to post
Share on other sites
Posted (edited)

Just checking KSAN now, looks absolutely fine to me. landed at kmyf earlier and that was also fine. Stock airports by the way

Edited by suspman

Share this post


Link to post
Share on other sites

I'm having the same problem. KSEE is a train wreck. I'm using a fresh install of XP-11... All default everything.

 

Thanks for the help! I'm really glad you guys did SoCal!

 

Cheers

Share this post


Link to post
Share on other sites

It depends on the default airports. Some have "flattening" enabled and others don't. I did correct a few, but as has been the case with the other regions, the airports get updated a few days later.

 

N.B. We can't fix the default airports in X-Plane, we can only provide tweaked versions of these. I'll check out these airports and see if I can smooth them out.

Share this post


Link to post
Share on other sites

Will do!

 

Thanks a ton for all the amazing work man. 

 

Will I have to do anything to get the patch installed when released?

 

Regards,

 

Ron

Share this post


Link to post
Share on other sites
1 minute ago, Ron Craighead said:

Will I have to do anything to get the patch installed when released?

 

It should just update via Orbx Central, so when you run that it'll install any updates

 

Share this post


Link to post
Share on other sites

For KSAN the issue is between the end of runway 27 and the threshold marks. I use the MisterX6 version of that airport but I desactivated it and same issue, it only disappears when I desactivate Ortho SoCal in the sim.

For KMYF I use the stock airport and there are bumps on runway 05/23 (the longer one is fine)

Share this post


Link to post
Share on other sites

KBWC is a bit of a rollercoaster, just made a post about it.

Share this post


Link to post
Share on other sites

@Tony Wroblewski I also agree just tried another flight landing in KSAN and the runway has dips in it. I too am using MisterX KSAN scenery and have no runway issues when disabling TE SOCAL and when it's enabled it has the dips.

 

Dave

Share this post


Link to post
Share on other sites
Posted (edited)

I managed to fix the  "roller coaster" runway issue at KSAN by editing the apt.dat file provided in the KSAN airport folder of MisterX6 and add the 1302 flatten 1 entry just after the airport header

Now for KMYF, I've no addon on top of TrueEarth and editing the default apt.dat file in resources/default scenery/default apt dat/earth nav data does not solve the bumps issue so I guess that should be fixed with a patch at the TE Socal Ortho level by Orbx

Edited by ydelta

Share this post


Link to post
Share on other sites
Posted (edited)

What is happened to KNID China Lake NAWS? Earthquake?

 

4eHz8BN.jpg

 

gtR4XYj.jpg

Edited by MikeFlight
  • Confused 1

Share this post


Link to post
Share on other sites
Posted (edited)

Seconding the very bumpy KMYF on runway 10L/28R. Stock airport from X-Plane.

Edited by MuldoonX9

Share this post


Link to post
Share on other sites

Just checked KMYF (default) and both runways and taxiways have ramps.

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

Sorry, I just did a free cam run from the end of 09 and it does have several ramp issues. Sad. No more fixed wind flights at my main airport until this is fixed. Fortunately I'm doing a lot of heli flying at the moment, but do want/need to do fixed wing here at KSAN ASAP. 

 

 

Edited by neilw

Share this post


Link to post
Share on other sites
Posted (edited)

KSAN , KMRY, 

have bump on taxiway and runway when i delete the Orbx it’s fine ,also SFD KLAX  and payware  KSNA  have some floating issues.

something to do with mesh i guess

 
Edited by Alli Chaytou

Share this post


Link to post
Share on other sites

I think Orbx rushed TE SOCAL , i own all the TE for xplane and i have to say very disappointed with  TE SOCAL  Orbx need to fix this issue asap .

Share this post


Link to post
Share on other sites

Came up with a temp fix by editing the Earth nav data/apt.dat file by adding a 1300 flatten 1 near the top.

I
1000 Generated by WorldEditor 2.0.0r3

1     17 1 0 KSAN San Diego Intl
1302 city San Diego
1302 flatten 1
1302 country United States
1302 datum_lat 32.733555556
1302 datum_lon -117.189666667

That did introduce a problem with missing center striping in a section of the runway, but at least the airport is now usable. Perhaps someone knows how to fix the "foggy" patch???? Beyond my skillset. 

 

Screen Shot 2020-05-11 at 7.00.17 PM.jpg

Share this post


Link to post
Share on other sites

Found a bit of a fix/improvement:

If you look at the next line in the apt.dat, which is

100 62.00 15 0 0.00 1 0 0 09  32.73712432 -117.20436304  313    0 0 10 1 0 27  32.72999968 -117.17497910  555    0 0 10 1 0

62 is the elevation of the field and is what it gets flattened at; change it to 65 to read

100 65.00 15 0 0.00 1 0 0 09  32.73712432 -117.20436304  313    0 0 10 1 0 27  32.72999968 -117.17497910  555    0 0 10 1 0

Share this post


Link to post
Share on other sites

A note here for patches:

 

- KSAN - San Diego International
- KMYF - Montgomery Field
- KSEE - Bumpy
- KBWC - Bumpy
- KNID - Bumpy
- KMRY - Bumpy
 

Enabling flattening on these fixes most of the bumpy problems, but the issue is that it then causes cliffs or floating buildings or breaks some payware airports. 

Share this post


Link to post
Share on other sites
On 5/12/2020 at 4:31 AM, neilw said:

Perhaps someone knows how to fix the "foggy" patch???? Beyond my skillset. 

 

I don't know what is causing this. My KSAN runway is a light grey colour. Is this some sort of addon or MisterX's airport environment?

  • Like 1
  • Upvote 1

Share this post


Link to post
Share on other sites
Posted (edited)
6 hours ago, Tony Wroblewski said:

 

I don't know what is causing this. My KSAN runway is a light grey colour. Is this some sort of addon or MisterX's airport environment?

This is the Captnchris KSAN.

https://forums.x-plane.org/index.php?/files/file/57437-ksan-san-diego-intl-airport/&page=7

In playing with the elevation edit, I'm pretty sure that the "grey" was simply an effect to sim the extra worn area of the most common touchdown area on RWY27. By increasing the elevation in the apt.dat file to about 66 or 67, the "foggy" grey becomes much more black and accurate/realistic. 

 

Once your patch/fix is out, I'll try reverting back to the original apt.dat file from the Captnchris package. 

Edited by neilw

Share this post


Link to post
Share on other sites

@Tony Wroblewski In the latest xp 11.50b6 was a revised Global Airports which added some new versions of a couple of existing airports plus some additional airports.If you look at the link you will see that there is a new edition of KSAN which looks similar ( green edges) to that of Captchris version. It is now the default KSAN in 11.50, but has not been added to 11.40/41. That is why we are seeing different issues. I have the new default KSAN and it is flat not bumpy.

Here is the Gatway link. The file is the Scenery ID 50988 dates 15 Feb 2020

 

https://gateway.x-plane.com/scenery/page/KSAN

  • Like 1

Share this post


Link to post
Share on other sites

Yep, this is a real problem. Flattening KSAN makes a really ugly cliff around the airport and causes floating buildings.

 

I've submitted an update (currently in testing) that smooths this out and included a version of KSAN that works. Unfortunately, MisterX's version won't have the edits he did.  I'd suggest anyone angry about this to please take it up with Laminar Research who need to give developers the ability to patch meshes locally (This would solve so many issues). If MisterX is willing to provide his modified DEM data for both KLAX and KSAN, then I'd be happy to integrate them in to the product.

 

 

 

 

 

Share this post


Link to post
Share on other sites
Posted (edited)

Will this have any bearing on the city being corrected?

 

How about the CaptChris version of San Diego? I think most folks have switched to that version of late.

Edited by Jrbaird19

Share this post


Link to post
Share on other sites

You have a choice to use one or the other. I can't modify the exclusions in a third-party scenery.  For our San Diego, there are now more tall buildings.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...